The Olight S1A Baton Limited Edition series is available in both stainless steel or solid copper housings. It's simple one button operation combined with high quality optics places the light where it is needed most. This model runs on a single easily available AA battery either rechargeable or standard types. This version sports the tough stainless steel housing with an attractive Thunder Gray PVD coating that is both scratch and corrosion resistant. This limited production model comes in a nice retail gift box.
The Operation: Easy to use with a raised single power/mode switch. Just tap the switch to resume to the last mode used. While the unit is on, press and hold to cycle through the brightness levels. A quick double tap will turn the light on to the highest level regardless of what mode was last used. Three quick taps puts the light into a disorientating strobe mode. With the light off, hold the button or more than one second to enable moonlight mode. Built-in timer settings can be enabled so that the light will automatically turn off. With the light on at any level a double-click and hold will start a 3 minute timer, another double-click and hold will switch the timer to 9 minutes length. Additionally, to maintain thermal control, the light will only run at the highest lumen output for a limited time before dropping down.
The Body: The sleek and slim design is not much larger than the included AA battery cell that powers it. The magnetic flat tail cap lets the light stand for hands free work while knurling on the main body keeps the light firmly in the hand. Another great feature is the high quality TIR, total internal reflection, reflector design that focuses all of the light into a nice round light distribution beam from the cool white LED emitter. Includes a handy removable stainless steel clip for convenient carry in shirt or pants pockets, as well as, the ability to clip onto a hat brim.
Outputs and Runtimes: 14500 Lithium 3.7V rechargeable battery required for 600 lumen mode. Outputs listed below are for Alkaline AA,
- 220/100 Lumens - 12 Mins +70 Mins
- 50 Lumens - 4.5 Hrs
- 5 Lumens - 75 Hrs
- 0.5 Lumens - 20 Days
|Bulb Type||CREE XM-L2 LED|
|Max Output||600 lumens|
|High Output||220 lumens|
|Medium Output||50 lumens|
|Low Output||5 lumens|
|Max Runtime||75 hours|
|Min Runtime||60 hours|
|Beam Distance||387 feet|
|Impact Resistance||1.5 meters|
|Body Material||Stainless Steel|
|Bezel Diameter||21 mm|
|Body Diameter||18.4 mm|
|Country of Manufacture||China|