The SRMINI Intimidator II is part of a new generation of flashlights from Olight with upgraded features and increased performance. This rechargeable model has a side mounted recharging port with battery status indicator led. This three LED powered light has a special new honeycomb-like lens to combine the three light sources into one wide homogeneous beam. Along with the increase in lumens, the strike bezel is made from thick stainless steel which makes this model an ideal choice for law enforcement. With over 3000 lumen output, heat is a concern but the aluminum body acts to dissipate heat generated by the light and deep knurling down the body provides a non-slip grip. For additional functionality, a flat tail-cap allows the light to stand on end to free hands for work.
Operation: Single side mounted switch operates the light. One click turns on the light to the last memorized mode. Once the light is on, hold down the button to move through the three brightness levels. Holding down the button for three seconds moves the light into turbo mode. A quick triple click activates a disorientating strobe effect.
Recharging: Rubber covered micro-USB port mounted on the side can recharge the three 18650 Li-ion batteries at up to 1500mA charging currant. Status LED will flash red If the batteries drop below 3.25V, stay solid red if below 3.05V. The light will fail to work if battery drops below 2.7V. When charging the status light will indicate red then change to green when fully charged. Olight recommends using an 18650 with at least 3000 mAh with protecting circuit board. Batteries not included.
|Bulb Type||CREE XM-L2 LED|
|Max Output||3200 lumens|
|High Output||1600 lumens|
|Medium Output||800 lumens|
|Low Output||200 lumens|
|Battery||3X - 18650 Li-ion|
|Max Runtime||16 hours|
|Min Runtime||3 hours|
|Beam Distance||879 feet|
|Impact Resistance||1.5 meters|
|Body Material||Aerospace Grade Aluminum|
|Bezel Diameter||47.5 mm|
|Body Diameter||47.5 mm|
|Country of Manufacture||China|