Fenix LD05 v2 100 Lumen Dual Output XQ-E Hi Warm LED Penlight

The Fenix LD05 V2.0 is a 2 x AAA every day carry penlight that features three brightness levels issuing from the very warm, 3000K Cree XQ-E HI LED (90-CRI) with added utility from a 365nm UV light. The UV light can be used to detect potentially harmful florescent agents as well as testing bank cards, ID cards and currency for anti-counterfeit marks. Both outputs are operated by the stainless steel tail switch. Powered by two included AAA batteries, this light delivers a maximum output of 100 lumens. Waterproof and dustproof, the LD05 V2.0 is a perfect penlight choice for your EDC lighting needs. Carries via an integral, milled, stainless steel pocket clip.

Brand new, direct from Fenix Flashlights

Warning
This flashlight is a high-intensity lighting device with UV light capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.

Operation: Fully press the tail switch to turn on/off the light. With the light switched on, tap the tail switch to cycle through Low-Med-High-UV. The light memorizes the last selected brightness level. When turned on again the previously used brightness level will be recalled. The light will accumulate a lot of heat when used on High output level for extended periods. When the light has been used on High for 3 minutes, the light will automatically step down by a few lumens until 60 lumens is reached to reduce the temperature. High mode can be re-selected.

Body: Sturdy aircraft grade aluminum body has o-rings to prevent water ingress with a stainless steel head and tail cap for added durability. Included items: Spare O-ring, AAA (Alkaline) Battery, User Manual, Warranty Card.

Other Features:

• Cree XQ-E HI LED (90-CRI/3000K warm white light) with a lifespan of 50,000 hours
• Fitted with a 365nm/200mW UV light
• Digitally regulated output maintains constant brightness
• Reverse polarity protection, protects from improper battery insertion
• Stainless steel tail switch and light head
• Tail switch operation for one-handed activation and output selection
• Made from durable, high-strength, Corrosion resistant aluminum and stainless steel
• Premium type HAIII hard-anodized anti-abrasive finish
• Quality optical lens

Outputs and Runtimes (Ni-MH battery):

• 100 lumens - 2 Hours 10 Mins
• 25 lumens - 6 Hours 40 Mins
• 5 lumens - 36 Hrs
• UV 200 mW - 7 Hrs