Chris Reeve Small Sebenza 31 Tanto Forever Flag Glass Blasted Titanium MagnaCut MIM Clip Frame Lock Knife (2.94" Blade) S31-1510-227
Model #:
CRK-S31-1510-227
Brand:
Chris Reeve
$590.00
In stock
(Usually Ships in 24-48 Hours)
Related Categories
Details
The Chris Reeve Small Sebenza 31 Tanto wears the Forever Flag graphic across glass blasted titanium, with a reinforced tanto tip in stonewashed Magnacut and the low-profile MIM clip riding tight against the frame.
- Stonewashed MagnaCut Tanto Blade - MagnaCut is a premium powder stainless, holding an edge longer than most stainless steels while resisting corrosion, and it is hardened here to 63-64 HRC. The hollow grind stays thin behind the edge, the tanto leaves the point thick, and the stonewash hides handling.
- Forever Flag Engraved Glass Blasted Titanium Handle - Two slabs of 6Al4V titanium, lapped flat and blasted to an even matte silvery-gray, carry the Forever Flag engraved on the show side as the flag in motion. Polished frame hardware and a satin lanyard pin finish it off.
- Reeve Integral Lock with Ceramic Ball Interface - A single titanium thumb lug runs the blade out on oversized bronze washers, opening with a click and locking up crisp. Inside the lockbar a ceramic ball sits in place of the titanium lock face, meeting the steel blade tang when the blade swings open.
- MIM Pocket Clip - Chris Reeve builds this clip through metal injection molding for a tighter, lower profile than the standard clip. It sets the knife for right-hand tip-up carry and sits close enough to the frame that it barely breaks the outline of the handle.
The Chris Reeve Small Sebenza 31
The Chris Reeve Small Sebenza 31 is a stripped-down working folder in titanium, built to some of the most precise tolerances in the industry. Each iteration of the Sebenza has been refined, tooled and tested to meet the best specifications available for its time. The 31 has hydraulic-like action thanks to oversized bronze washers at the pivot, and lockup has never been smoother with a ceramic ball lock interface Chris Reeve added to the frame lock bar. An offset pocket clip keeps pressure off the lockbar for ease of opening.
Specifications
| Knife Action | Manual |
|---|---|
| Brand | Chris Reeve |
| Overall Length | 6.92" |
| Blade Length | 2.94" |
| Sharpened Length | 2.90" |
| Blade Thickness | 0.12" |
| Blade Material | MagnaCut |
| Blade Type | Stainless |
| Blade Rockwell | 63-64 HRC |
| Blade Grind | Hollow |
| Blade Finish | Tumbled |
| Opening Method | Thumb Stud/Disc |
| Pivot | Washers (Phosphor Bronze) |
| Lock Type | Frame Lock |
| Closed Length | 3.98" |
| Handle Thickness | 0.40" |
| Handle Material | Titanium |
| Hardware | Stainless Steel |
| Clip Material | Titanium |
| Clip Position | Tip-Up |
| Weight | 2.90 oz. |
| Condition | New |
| Country of Origin | United States |









