Hinderer Eklipse 3.0 Fullered Harpoon Spearpoint Non-Flipper Translucent G10 Battle Bronze Titanium Magnacut Working Finish Folding Knife (3.10" Blade)

Model #: HK-1987
Brand: Hinderer Knives
$425.00
Military & First Responder Discount Applied
In stock (Usually Ships in 24-48 Hours)
Save Item

Military or First Responder? This item is eligible for our Discount Program.

Details

The Hinderer Eklipse 3.0 Non-Flipper in Translucent G10 and Battle Bronze titanium pairs a glassy handle with warm, rugged metal. Its Working Finish Magnacut spearpoint keeps a centered tip for controlled piercing.

  • Magnacut Blade Steel - Magnacut is a stainless powder steel that pairs outstanding rust resistance with real toughness. It holds an edge well too, and it carries daily cutting a long way between sharpenings.
  • Fullered Harpoon Spearpoint - The point sits centered in line with the handle. That alignment keeps piercing cuts controlled and predictable. A fuller sits in each face of the blade just below the spine.
  • Working Finish Blade - Blasting followed by tumbling leaves the steel a dull pewter tone with almost no shine. It wears scratches quietly and keeps the look as subdued as the bronze liners.
  • Non-Flipper Thumb Stud Opening - There is no flipper tab on this build. The thumb stud alone launches the blade, and it swings free enough on its bearings to flick fully open with one push.
  • Translucent G10 Scales - Translucent G10 has a pale, glassy cast that lets light pass into the material. The smooth matte scales cover both handle faces and pair with the bronze liners for a vintage look.
  • Battle Bronze Titanium Liners - Battle Bronze starts as Working Finish titanium and is then anodized bronze. The warm metal frames the translucent scales and keeps handling wear out of sight.

The Hinderer Eklipse 3.0

Rick Hinderer drew the Eklipse with straighter, more linear lines than his XM-18. The Eklipse 3.0 packs that design into a compact handle built on thick titanium liners and keeps the toughness of the larger model. With the blade open, the tip lines up with the center of the handle, and that alignment makes the knife feel light and easy to steer. Double finger grooves and a sloping underside shape the grip, and a jimped thumb ramp on the blade gives the thumb a firm place to push when a cut takes pressure.

  • Liner Lock - The lock-side titanium liner is heavier than its partner, and it engages early on the blade tang. The open blade sits with no play in any direction, side to side or up and down.
  • Thumb Stud Blade Stop - The thumb stud does double duty. Working with a stop pin, it serves as the blade stop that halts the blade at full open. One part both starts the swing and ends it.
  • Tri-Way Pivot System - The pivot ships running on bearings. Phosphor bronze and Teflon washers come included as alternates. Swap them in to tune the action for the environment the knife works in.
  • Firm Detent - The detent holds the blade shut with real resistance. Push past it on the thumb stud and the stored pressure releases the blade with momentum behind it.
  • Two Finger Grooves - Two grooves shaped into the underside of the handle give the index and middle fingers their own seats. They lock the grip in place and stop the hand from sliding forward toward the edge.
  • Aggressive Jimping - Sharp jimping teeth line the blade spine near the pivot and the tail of the handle spine. They bite into the thumb for firm traction when a cut calls for pressure.
  • Titanium Pocket Clip - The titanium clip mounts for tip-up, right-side carry only. Left-handed and tip-down carriers should plan around that single position before buying.

Specifications

Specifications
Knife Action Manual
Brand Hinderer Knives
Designer(s) Rick Hinderer
Overall Length 7.41"
Blade Length 3.10"
Sharpened Length 2.82"
Blade Thickness 0.14"
Blade Material MagnaCut
Blade Type Stainless
Blade Grind Flat
Blade Finish Blasted, Tumbled
Opening Method Thumb Stud/Disc
Pivot Hinderer Tri-Way Pivot
Lock Type Liner Lock
Closed Length 4.31"
Handle Thickness 0.50"
Handle Material G10
Hardware Titanium
Liner(s) Titanium
Clip Material Titanium
Clip Position Tip-Up
Weight 3.90 oz.
Condition New
Country of Origin United States

Similar Products

Customer Reviews

Write Your Own Review
Please login or create an account to leave a review for this product.