Hinderer Project X Clip Point Blue/Black G10 Working Finish Titanium and Stonewash S45VN Folding Knife (3.66")
Related Categories
Details
Hinderer Project X in Blue/Black G10 runs a two-tone scale over a clean, textured working-finish titanium frame, with a stonewashed clip point blade in S45VN steel and a matching working-finish clip.
- S45VN Stonewashed Clip Point Blade — The clip point blade is ground from S45VN stainless steel and finished in a stonewash that hides scratches and fights rust. An integral flipper tab snaps the blade open one-handed, with jimping on the spine for a locked-in grip.
- Working Finish Frame and Blue/Black G10 — A textured, CNC-machined working-finish titanium frame keeps things understated next to a blue-and-black textured G10 presentation scale. The tip-up titanium pocket clip wears the same working finish, and the rest of the hardware is plain titanium.
- Tri-Way Pivot System — The Rick Hinderer signature pivot lets you tune how the blade swings by switching between ball bearings, phosphor bronze washers, or Teflon washers. Set it loose and fast or smooth and damped, then change it again whenever your preference shifts.
- Frame Lock and Modular Backspacer Tool — A titanium frame lock with a steel insert and the Hinderer Lockbar Stabilizer locks the blade up tight with overtravel protection. The Hinderer Modular Backspacer System doubles as an on-board tool that breaks the whole knife down for cleaning or adding accessories.
The Hinderer Project X
Rick Hinderer built the Project X to take on tough, everyday cutting work, machined to tight tolerances in Shreve, Ohio. An integral flipper tab opens the blade one-handed, and the titanium frame lock carries overtravel protection and a steel lockface insert so the lockup holds up over years of use. A textured titanium frame matches the textured G10 presentation scale for a consistent grip, and a titanium pocket clip sets up tip-up, right-hand carry. The Hinderer Modular Backspacer System doubles as a tool that takes the whole knife apart for cleaning or swapping in accessories.
Specifications
| Knife Action | Manual |
|---|---|
| Brand | Hinderer Knives |
| Designer(s) | Rick Hinderer |
| Overall Length | 8.66" |
| Blade Length | 3.66" |
| Sharpened Length | 3.63" |
| Blade Thickness | 0.17" |
| Blade Material | CPM-S45VN |
| Blade Type | Stainless |
| Blade Grind | Flat |
| Blade Finish | Tumbled |
| Opening Method | Flipper |
| Pivot | Hinderer Tri-Way Pivot |
| Lock Type | Frame Lock |
| Safety Features | Hinderer Lock Bar Stabilizer |
| Closed Length | 5" |
| Handle Thickness | 0.53" |
| Handle Material | G10, Titanium |
| Hardware | Titanium |
| Liner(s) | Titanium |
| Clip Material | Titanium |
| Clip Position | Tip-Up |
| Weight | 6.42 oz. |
| Condition | New |
| Country of Origin | United States |
