Hinderer XM-18 3.5" Slicer Flipper Textured Natural Micarta Light Green Beadblasted Titanium and Two-Tone 20CV Folding Knife (3.50")

Hinderer XM-18 3.5" in Textured Natural Micarta carries an earthy, age-it-yourself scale alongside a light green bead-blasted frame, brass hardware, and a two-tone satin and bead-blast slicer blade in 20CV steel.

• 20CV Satin Bead Blast Two-Tone Slicer Blade — The iconic Hinderer slicer is hollow-ground from CPM 20CV steel and given a two-tone finish, mixing bright satin areas with a soft bead-blast for a custom-shop contrast. A flipper tab and ambidextrous thumb stud both open the blade fast.
• Light Green Anodized Beadblasted Frame and Textured Natural Micarta — A soft light-green anodized frame with a bead-blasted texture pairs with a textured natural Micarta scale that ages into its own patina. Brass hardware warms up the earthy, organic palette.
• Tri-Way Pivot System — The Rick Hinderer signature pivot lets you tune how the blade swings by switching between ball bearings, phosphor bronze washers, or Teflon washers. Set it loose and fast or smooth and damped, then change it again whenever your preference shifts.
• Titanium Frame Lock with Lock Bar Stabilizer — A full titanium frame lock with a hardened steel insert drops the blade into a solid, repeatable lockup. The Hinderer Lock Bar Stabilizer keeps the lock bar from overtraveling for years of dependable use.

The Hinderer XM-18 3.5"

The Hinderer XM-18 3.5" is a legend in the knife world for good reason. The evolution over the years is well documented and only getting better. This finely tuned cutting machine has a dialed-in detent and smooth bearings pivot action. The bomb-proof construction is mostly titanium with an interchangeable handle scale up front and top-of-the-line steel for the blade. The size is just right for the majority of paws out there.