Hinderer XM-18 3" Slicer Non-Flipper Textured Blue to Gold Fade Titanium and Stonewash 20CV Folding Knife (3.00")

Hinderer XM-18 3" in Blue to Gold Fade Titanium runs a non-flipper, all-metal build, with a stonewashed 20CV slicer blade and blue titanium hardware over a textured handle and smooth frame that share one striking anodized fade.

• 20CV Stonewashed Slicer Blade — The iconic Hinderer slicer is hollow-ground from CPM 20CV steel and finished in a stonewash that hides scratches and fights rust. Dual thumb studs open the blade from either side on this non-flipper.
• Blue to Gold Fade Titanium Handle and Frame — A textured titanium handle and a stonewashed titanium frame share a striking blue-to-gold anodized fade that runs warm to cool across the knife. Blue titanium hardware and a milled Holey clip finish the all-metal build.
• Tri-Way Pivot System — The Rick Hinderer signature pivot lets you tune how the blade swings by switching between ball bearings, phosphor bronze washers, or Teflon washers. Set it loose and fast or smooth and damped, then change it again whenever your preference shifts.
• Titanium Frame Lock with Lock Bar Stabilizer — A full titanium frame lock with a hardened steel insert drops the blade into a solid, repeatable lockup. The Hinderer Lock Bar Stabilizer keeps the lock bar from overtraveling for years of dependable use.

The Hinderer XM-18 3"

The Hinderer XM-18 3" is a legend in the knife world for good reason. The evolution over the years is well documented and only getting better. This finely tuned cutting machine has a dialed-in detent and smooth bearings pivot action. The bomb-proof construction is mostly titanium with an interchangeable handle scale up front and top-of-the-line steel for the blade. The size is just right for the smaller pockets or pouches out there.