Hogue Bagby Slate Blue Drop Point Polymer Stone Tumbled 440C Slip Joint Folding Knife (2.80" Blade) 64573
Related Categories
Details
This knife drops on Friday November 27th at 9AM Central.
Slate Blue scales put a cool splash of color on the Hogue Bagby with a drop point blade. Underneath, a one-piece stainless frame works as the spring, and the whole knife is built in the USA.
- Drop Point 440C Blade - A sturdy drop point tip sits over a gentle slicing belly. 440C stainless is prized for corrosion resistance and hones back to sharp with little effort, though premium steels last longer between sharpenings. The edge is hand sharpened and honed under a stone tumbled finish.
- Slate Blue Polymer Scales - Slate Blue polymer scales give the Bagby a cool, muted color that stands out without shouting. The glass fiber reinforced nylon is light and tough, and moisture won't bother it. Next to the blue, the stone tumbled blade and frame read crisp and bright.
- One-Piece Steel Frame - A single piece of stainless steel forms the frame, and that frame is the spring. It supplies the tension that holds the blade open, with no separate internal springs. As a slip joint, the Bagby relies on that tension rather than a lock.
- Clipless Lanyard Carry - The Bagby ships without a pocket clip. A lanyard hole at the end of the steel frame takes a cord or fob instead. Clean, clipless sides keep the traditional slip joint look intact, in hand and in the pocket.
The Hogue Bagby
Scott Bruhns of Bruhns Design took the old-school slip joint and redrew it with crisp, modern lines for the Bagby. Most slip joints tuck a separate backspring inside the handle, but the Bagby lets its one-piece stainless frame supply the tension. It brings the American manufacturing behind every Hogue knife down to an entry-level price tier. Featherlight, slim, and free of a clip or lock, it is a pocketknife in the oldest sense, made to drop loose into a pocket and come out for the small cuts of the day.
Specifications
| Knife Action | Manual |
|---|---|
| Brand | Hogue |
| Overall Length | 6.40" |
| Blade Length | 2.80" |
| Blade Material | 440C |
| Blade Type | Stainless |
| Blade Rockwell | 58-61 HRC |
| Blade Grind | Flat |
| Blade Finish | Tumbled |
| Opening Method | Nail Nick |
| Closed Length | 3.60" |
| Handle Material | Polymer |
| Hardware | Stainless Steel |
| Weight | 1.50 oz. |
| Condition | New |
| Country of Origin | United States |









