TRM Bulldog Rev B Neon Orange 3D Contoured CamoCarbon MagnaCut Crossbar Lock Knife (2.95" Blade)

This TRM Bulldog Rev B has 3D contoured scales in Neon Orange CamoCarbon. It is a compact, thick-stock crossbar lock knife with a full flat ground MagnaCut blade built for slicing and for harder work.

• Thick-Stock MagnaCut Blade - Ground full flat from thick stock, the blade is finished in a two-stage ceramic tumble. Magnacut resists rust like few stainless steels can while holding a tough, long-lasting edge.
• Neon Orange 3D Contoured CamoCarbon Scales - CamoCarbon is a USA-made material cured from aerospace-grade carbon fiber under high heat and vacuum pressure. This run comes in hard-to-miss neon orange. The scales are 3D contoured and finished smooth with a low sheen.
• River-LOK Crossbar Lock - The River-LOK is a crossbar lock you can work with either hand, dropping into place with a solid click and releasing the same way from both sides. Caged ceramic ball bearings and a widened blade opening let the blade flick out fast and snap shut clean.
• Deep-Carry Titanium Clip - A Grade 5 titanium clip rides the knife low and quiet, tucking it deep enough that almost nothing peeks above the pocket seam. Tip-up carry keeps it set to grab and open one-handed. The closed knife is short enough to disappear in a front pocket.

The TRM Bulldog Rev B

The TRM Bulldog Rev B is the stoutest folder Three Rivers Manufacturing builds. It stays compact but runs heavier blade stock than anything else in the TRM Knives lineup. It takes its name from Roxy and Riley, the two French Bulldogs owned by TRM founders Les and Marianne Halpern. Each Bulldog is machined and assembled in Massachusetts, small enough for a front pocket and tough enough to lean into knotted rope and thick rubber hose.