TRM Bulldog Rev B Pop 3D Contoured CamoCarbon MagnaCut Crossbar Lock Knife (2.95" Blade)

In Pop CamoCarbon, this TRM Bulldog Rev B is a compact crossbar lock knife on thick stock, with 3D contoured scales. Its full flat ground MagnaCut blade is made to slice and to take harder work.

• Thick-Stock MagnaCut Blade - Ground full flat from thick stock, the blade is finished in a two-stage ceramic tumble. Magnacut resists rust like few stainless steels can while holding a tough, long-lasting edge.
• Pop 3D Contoured CamoCarbon Scales - CamoCarbon is aerospace-grade carbon fiber cured with heat under vacuum pressure, here with purple, orange and pink set through it in a random pattern. The scales are 3D contoured and finished smooth with a low sheen.
• River-LOK Crossbar Lock - The River-LOK is a crossbar lock you can work with either hand, dropping into place with a solid click and releasing the same way from both sides. Caged ceramic ball bearings and a widened blade opening let the blade flick out fast and snap shut clean.
• Deep-Carry Titanium Clip - A Grade 5 titanium clip rides the knife low and quiet, tucking it deep enough that almost nothing peeks above the pocket seam. Tip-up carry keeps it set to grab and open one-handed. The closed knife is short enough to disappear in a front pocket.

The TRM Bulldog Rev B

The TRM Bulldog Rev B is the stoutest folder Three Rivers Manufacturing builds. It stays compact but runs heavier blade stock than anything else in the TRM Knives lineup. It takes its name from Roxy and Riley, the two French Bulldogs owned by TRM founders Les and Marianne Halpern. Each Bulldog is machined and assembled in Massachusetts, small enough for a front pocket and tough enough to lean into knotted rope and thick rubber hose.