Zero Tolerance 0203BLKTS Black G10 CPM M4 Tiger Stripe DuraLock Knife (4.00" Blade)
Model #:
ZT-0203BLKTS
Brand:
Zero Tolerance
$312.00
In stock
(Usually Ships in 24-48 Hours)
Related Categories
Details
Built for hard work, the Zero Tolerance 0203BLKTS pairs a tiger stripe CPM M4 blade with black G10. That blade swings free off either thumb stud, and a hardened steel crossbar locks it open without play.
- CPM M4 Tool Steel - A high-speed tool steel prized for holding a working edge through long runs of hard cutting, with plenty of toughness backing it up.
- Tiger Stripe Finish - Dark bands sweep across a gray blade in the stripe pattern Zero Tolerance has long worn on its hard-use folders. It sets this version apart from the solid-coated and stonewashed models.
- Black G10 Handle - Black G10 scales are 3D-machined with rows of small raised ridges. The texture gives the hand light traction on the handle without turning it into sandpaper against the inside of a pocket.
The Zero Tolerance 0203
The 0203 is the first Zero Tolerance folder built around a crossbar lock, bringing the DuraLock design from sister brand Kershaw into a full-size knife for hard-use work. Thick blade stock, steel liners under the scales and a hardened steel bar holding the blade open all serve that one job. The build carries more heft than a typical pocket folder. Every control works from either side, and a common wrench snugs the pivot bolt that runs through the whole handle.
- Dual Thumb Studs - A stud on each side of the blade lets either thumb open the knife. Out of the box the blade travels open freely under a light push from either side.
- DuraLock Crossbar - A hardened steel crossbar catches the blade open and holds it with no movement in any direction. To close, draw back the staircase-textured button and it releases easily with one hand.
- Through-Handle Pivot - The solid pivot bolt runs through the entire handle and turns on phosphor bronze washers. Tension adjusts with an ordinary 5/16" wrench. No special driver is needed.
- Steel Liners - Thick steel liners run beneath the textured G10 scales. The handle gets a steel core under its composite skin instead of relying on the scales alone for strength.
- Reversible Deep-Carry Clip - The black clip carries the knife tip-up and rides deep in the pocket. It moves to the other side of the handle for left or right pocket carry.
Specifications
| Knife Action | Manual |
|---|---|
| Brand | Zero Tolerance |
| Overall Length | 9.25" |
| Blade Length | 4.00" |
| Sharpened Length | 3.90" |
| Blade Thickness | 0.16" |
| Blade Material | CPM-M4 |
| Blade Type | Carbon |
| Blade Grind | Flat |
| Blade Finish | Blasted, Coated |
| Blade Coating | Cerakote |
| Opening Method | Thumb Stud/Disc |
| Pivot | Washers |
| Lock Type | Crossbar Lock |
| Lock Mechanism | Kershaw Duralock |
| Closed Length | 5.25" |
| Handle Thickness | 0.62" |
| Handle Material | G10 |
| Hardware | Stainless Steel |
| Liner(s) | Stainless Steel |
| Clip Material | Stainless Steel |
| Clip Position | Tip-Up |
| Weight | 6.60 oz. |
| Condition | New |
| Country of Origin | United States |









