Zero Tolerance 0545BWMC Black Micarta BlackWash Magnacut Flipper Knife (3.15" Blade)
Model #:
ZT-0545BWMC
Brand:
Zero Tolerance
$288.00
In stock
(Usually Ships in 24-48 Hours)
Related Categories
Details
Workwear-rugged and quietly sharp, the Zero Tolerance 0545BWMC in Black Micarta and BlackWash wears a distressed dark finish on blade and frame that shrugs off daily scuffs. Textured black Micarta fills the front scale.
- CPM Magnacut Blade Steel - A stainless powder steel that resists rust better than almost any blade steel. It stays tough and holds a keen edge through long stretches of slicing between touch-ups.
- BlackWash Finish - A distressed dark finish covers the blade and the titanium lock side. It helps hide the scuffs that daily carry leaves behind, and a textured black Micarta front scale and black hardware complete the build.
The Zero Tolerance 0545
The 0545 is a ZT Original, designed in-house and built in Oregon. Zero Tolerance made its name on thick, hard-use folders, but this one goes the other way with a slim titanium frame and unusually thin blade stock. A full-width flat grind carries that thin stock all the way to the edge for clean, low-drag slicing.
- KVT Flipper Deployment - A flipper tab rides the KVT ball-bearing pivot from Zero Tolerance. A crisp break off the detent sends the blade out fast and fully open every time.
- Spine Jimping - A short run of jimping on the spine gives the thumb a sure grip point. That purchase steadies the blade when pressing through slow, controlled slicing cuts.
- Titanium Frame Lock - The titanium lock side holds the blade open with no play in any direction. That solid lockup lets the thin edge track exactly where the hand guides it through a cut.
- Reversible Deep-Carry Clip - The minimal clip swaps sides for left or right tip-up carry and rides low in the pocket. Its screws stay hidden from view on the show side.
Specifications
| Knife Action | Manual |
|---|---|
| Brand | Zero Tolerance |
| Overall Length | 7.40" |
| Blade Length | 3.15" |
| Sharpened Length | 3.10" |
| Blade Thickness | 0.08" |
| Blade Material | MagnaCut |
| Blade Type | Stainless |
| Blade Grind | Flat |
| Blade Finish | Coated, Tumbled |
| Blade Coating | Black Oxide |
| Opening Method | Flipper |
| Pivot | KVT (Kershaw Velocity Technology) |
| Lock Type | Frame Lock |
| Closed Length | 4.25" |
| Handle Thickness | 0.37" |
| Handle Material | Micarta, Titanium |
| Hardware | Stainless Steel |
| Clip Material | Stainless Steel |
| Clip Position | Tip-Up |
| Weight | 2.00 oz. |
| Condition | New |
| Country of Origin | United States |









