Buck 791 Range Elite Trail Worn Green Tumbled Anodized Aluminum MagnaCut Stonewash Crossbar Lock Knife (3.38" Blade) 0791GRS2
Model #:
BU-0791GRS2
Brand:
Buck
Retail: $290.00
$230.00
In stock
(Usually Ships in 24-48 Hours)
Related Categories
Details
The Buck 791 Range Trail Worn Elite in tumbled green aluminum shows up looking like it already put in a season. Stonewashed Magnacut hides the scratches, and the crossbar lock works the same way in either hand.
- Stonewashed Magnacut Blade - Magnacut refuses rust better than most high-end steels and still sharpens without a fight, a rare pairing. The flat-ground drop point runs thin at the spine, and the stonewash finish swallows working marks.
- Ambidextrous Crossbar Lock - Pull the tabs on either side and the blade swings free, let go and the spring-loaded bar drops in behind the tang. Nothing about the motion favors a right hand or a left. Dual thumb studs open it one-handed without ever touching the lock.
- Tumbled Green Anodized Aluminum - The scales are anodized green, then tumbled, which knocks the gloss down and leaves the color soft and lived-in. Contoured slabs sit on tumble-polished stainless liners, slim in the hand and stiff under load.
- Deep Carry Pocket Clip - The clip mounts tip-up on either side and rides low enough that only a strip of handle shows above the seam. At about the weight of a deck of cards, it lies flat against your leg instead of dragging the pocket down.
The Buck 791 Range Elite
The Buck 791 Range Elite is a full-size everyday folder whose crossbar lock was the first the company ever put in a knife. Everything about it works from both sides, from the twin thumb studs to the clip that swaps left or right. It reads modern next to the lockbacks and fixed blades Buck is known for, and earns its place in your carry rotation with a thin flat grind and a handle that stays narrow in the pocket. The steel still goes through the same Bos heat treatment as the rest of the line, ground and finished in Post Falls, Idaho.
Specifications
| Knife Action | Manual |
|---|---|
| Brand | Buck |
| Overall Length | 7.88" |
| Blade Length | 3.38" |
| Blade Thickness | 0.09" |
| Blade Material | MagnaCut |
| Blade Type | Stainless |
| Blade Grind | Flat |
| Blade Finish | Tumbled |
| Opening Method | Thumb Stud/Disc |
| Lock Type | Crossbar Lock |
| Closed Length | 4.50" |
| Handle Material | Aluminum |
| Hardware | Stainless Steel |
| Liner(s) | Stainless Steel |
| Clip Material | Stainless Steel |
| Clip Position | Tip-Up |
| Weight | 3.60 oz. |
| Condition | New |
| Country of Origin | United States |









