MachineWise Sonora #2160 Diamond Textured Tumbled Titanium Brass Bolster Lightwash S90V Drop Point Button Lock Flipper (3.35")

Model #: MCW-003
Brand: MachineWise
$800.00
In stock (Usually Ships in 24-48 Hours)
Save Item

Details

A diamond-milled grip defines the MachineWise Sonora #2160, its tumbled titanium frame and brass bolster paired with a lightwash S90V blade. The texture bites without chewing up a pocket.

  • S90V Lightwash Drop Point Blade - S90V is a high-vanadium stainless whose hard carbides give it long edge retention and heavy wear resistance. Those same carbides make it stubborn to sharpen, taking diamond or CBN stones to touch up. The lightwash finish stays bright, and this blade tested at 62.6 HRC.
  • Bushing Pivot Flipper Action - A stainless bushing pivot tuned to tight tolerances lets the blade flip fast and free off the flipper tab. The action stays glassy from the first press, with no grit and no wobble. This ranks among the smoothest folders you will handle, and it fires the same way every time.
  • Button Lock - The button lock presses clean and drops the blade shut with a light nudge, one-handed and fully ambidextrous. Lockup is rock solid with zero blade play, and the blade sits dead centered on every close. It is a mechanism you stop thinking about because it simply works.
  • Diamond Textured Tumbled Titanium Handle - The integral frame is cut from one block of Grade 5 titanium and milled with a diamond pattern for real grip. A tumbled finish keeps the shine low, a brass bolster warms the lines, and the reversible titanium clip carries deep. The pattern grabs your palm.

The MachineWise Sonora

The MachineWise Sonora is the first folding knife from a small five-person shop in Phoenix, Arizona. It carries into an everyday format the flipper background that MachineWise earned building balisongs, built around a button lock for secure, repeatable lockup and quick one-handed use. The frame is an integral, cut from a single block of Grade 5 titanium so the whole handle is one solid piece instead of a sandwich of slabs and hardware. Every Sonora leaves the shop numbered, with the blade hardness tested and written on the QC card in the box.

Specifications

Specifications
Knife Action Manual
Brand MachineWise
Overall Length 7.95"
Blade Length 3.35"
Sharpened Length 3.22"
Blade Thickness 0.12"
Blade Material CPM-S90V
Blade Type Stainless
Blade Rockwell 62.6 HRC
Blade Grind Flat
Blade Finish Tumbled
Opening Method Flipper
Lock Type Button Lock
Closed Length 4.40"
Handle Thickness 0.40"
Handle Material Titanium
Bolster(s) Brass
Clip Material Titanium
Clip Position Tip-Up
Weight 3.50 oz.
Condition New
Country of Origin United States

Similar Products