TRM Neutron 2 Star Spangle G10 3D Magnacut Liner Lock Folding Knife (3.00")

The TRM Neutron 2 in Star Spangle G10 flies red, white, and blue across a 3D-milled grip, then lets a Magnacut blade do the talking with rust-resistant edge holding that lasts all week.

• Star Spangle G10 Scales — Layered red, white, and blue G10 is milled into a 3D contour that fills the hand and grips even when wet. The patriotic stack catches light along every machined ridge for a look that stands out on the bench or in the pocket.
• Magnacut Blade Steel — CPM Magnacut keeps a sharp edge through long cutting sessions and resists rust even when the knife rides in a damp pocket. The full flat grind runs thin behind the edge. It bites into rope, cardboard, and tape with very little effort.
• Two-Stage Ceramic Finish — Every blade is deburred by hand and then tumbled and polished in ceramic media, a finishing step plenty of makers skip. The result is a smooth, even surface that cuts down glare, hides everyday scratches, and wipes clean after messy jobs.
• Smooth Thumb-Stud Opening — Custom titanium thumb studs flick the blade open one-handed, and a steel liner snaps over to lock it solid for cutting. The Neutron 2 stays lighter than a deck of cards and rides low and tip-up in the pocket.

The TRM Neutron 2

Three Rivers Manufacturing builds the Neutron 2 in Massachusetts, where a small crew machines and assembles every knife under one roof. The model landed in 2019 as a reworked take on the original Neutron, adding pocketed titanium liners that let you swap scales in minutes and a deeper-riding titanium pocket clip. The platform is tuned around clean slicing, with a thin, fully flat-ground blade that does the cutting work for you. Every blade leaves the shop with USA etched into the steel.