TRM Neutron 2 Tangerine Tiger Orange G10 3D Magnacut Liner Lock Folding Knife (3.00")

The TRM Neutron 2 in Tangerine Tiger Orange G10 throws bright orange and black waves across a 3D-milled grip, backing the bold look with a Magnacut blade built to cut and resist rust.

• Tangerine Tiger Orange G10 Scales — Bright tangerine orange G10 runs through with dark tiger striping, milled into a 3D contour that grips hard when wet. The high-visibility color is easy to spot in a bag or on the bench, and the composite shrugs off water and hard use.
• Magnacut Blade Steel — CPM Magnacut keeps a sharp edge through long cutting sessions and resists rust even when the knife rides in a damp pocket. The full flat grind runs thin behind the edge. It bites into rope, cardboard, and tape with very little effort.
• Two-Stage Ceramic Finish — Every blade is deburred by hand and then tumbled and polished in ceramic media, a finishing step plenty of makers skip. The result is a smooth, even surface that cuts down glare, hides everyday scratches, and wipes clean after messy jobs.
• Smooth Thumb-Stud Opening — Custom titanium thumb studs flick the blade open one-handed, and a steel liner snaps over to lock it solid for cutting. The Neutron 2 stays lighter than a deck of cards and rides low and tip-up in the pocket.

The TRM Neutron 2

Three Rivers Manufacturing builds the Neutron 2 in Massachusetts, where a small crew machines and assembles every knife under one roof. The model landed in 2019 as a reworked take on the original Neutron, adding pocketed titanium liners that let you swap scales in minutes and a deeper-riding titanium pocket clip. The platform is tuned around clean slicing, with a thin, fully flat-ground blade that does the cutting work for you. Every blade leaves the shop with USA etched into the steel.